Minnesota Department of Transportation

511 Travel Info

Hwy 10—Randall

Morrison County

Improve access

Thanks to those who visited us at the open house Wed, July 24 at Bingo Park.

Work begins mid-August

MnDOT will improve access and safety along both directions of Hwy 10 through Randall, which includes two J-turn intersections at Morrison Co. Rd. 14 and Hwy 115.

Hwy 115/80th Ave and Hwy 10 access Co Rd 104 at Hwy 10 Co Rd 14 and Hwy 10 access
Improve access in Randall. Select map to enlarge

Summary of 2024 work

  • Reconstruct the Hwy 10 access at Morrison Co. Rd. 14 with a J-turn design
  • Close and remove the Hwy 10 median crossover at Co. Rd. 104 and Willow Ln.
    • Note: Motorists will turn right and make a U-turn at the next median access
  • Reconstruct the Hwy 10 access at Hwy 115/ 80th Ave. with a J-turn design
  • Make other updates as warranted

Future impacts

2024 work zone in Randall. Select image to enlarge

More details will be available once a contractor is on board. Information subject to change.

Hwy 10

  • Periodic lane or shoulder closures at off-peak hours

Randall is open

  • Local access will be maintained; however, expect changes as crews work at each intersection. Access will detour at times, follow signs.
    • Tentative access routes when closed:
      • Co. Rd. 14/1 closes west of Hwy 10: use Co. Rd. 207/Bison Rd. in Cushing
      • Co. Rd. 14/1 closes east of Hwy 10 Randall: use Co. Rd. 104/6th St. and Pacific Ave. in Randall
      • Hwy 115 closes at Hwy 10: use Co. Rd. 104/6th St. in Randall
      • 80th Ave. closes at Hwy 10: use 210th Ave. east of Randall
    • If a Hwy 10 median closes; continue to the next open median and make a U-turn.

About J-turns

J-turns, also known as reduced conflict intersections, are a driving movement proven to reduce serious and fatal crashes caused by “T-bone” crashes at intersections. When using J-turns, drivers focus on one direction of traffic at a time. Learn more about J-turns in Minnesota

Illustration shows how the motorist would safely navigate and access both directions of Hwy 10 or continue across on local roads
1 Stop and yield to vehicles in both lanes to your left 2 Crossover into the lane in the median 3 Yield to vehicles in both lanes to your right 4 Make a U-turn and head towards your destination 5 Either continue through the intersection or turn right

How to use J-turns

  1. Stop and yield to vehicles in both lanes to your left
  2. Crossover into the lane in the median
  3. Yield to vehicles in both lanes to your right
  4. Make a U-turn and head towards your destination
  5. Either continue through the intersection or turn right